TensorBoards getting started with Tensorflow
Get started with TensorBoard
Last updated
Get started with TensorBoard
Last updated
Taking advantage of TensorBoards from within a TensorFlow code requires just a few lines of code.
This quickstart will show how to quickly get started with TensorBoard. The remaining guides in this website provide more details on specific capabilities, many of which are not included here.
Here you can learn how to launch and interact with Gradient Tensorboards. In this tutorial you will learn how to modify your code to output your TensorFlow operations into a file, called an event file (or event log file).
A great tutorial can also be found at the official Tensorflow website.
All you need to do to add a scalar to a TensorBoard is as follows:
# Save accuracy scalar to Tensorboard output.
tf.summary.scalar('train_accuracy', accuracy[1])
tf.summary.scalar('loss', loss)That's it!
Summary is a special TensorBoard operation that takes in a regular tensor and outputs the summarized data to disk (i.e. to the event file). Basically, there are three main types of summaries:
1. tf.summary.scalar: used to write a single scalar-valued tensor (like classification loss or accuracy value)
2. tf.summary.histogram: used to plot a histogram of all the values of a non-scalar tensor (like weight or bias matrices of a neural network)
3. tf.summary.image: used to plot images (like input images of a network, or generated output images of an autoencoder or a GAN)
This method writes the values of a scalar tensor that changes over time or iterations. In the case of neural networks (such as a simple network for a classification task), it's usually used to monitor changes in the loss function or classification accuracy.
Let's run a simple example to see how it works.
Randomly pick 100 values from a standard Normal distribution, N(0, 1), and plot them one after the other.
One way to do so is to simply create a variable and initialize it from a normal distribution (with mean=0 and std=1), then run a for loop in the session and initialize it 100 times. The code will be as follows, and the steps required to write the summary is also explained in the code as follows:
import tensorflow as tf
tf.reset_default_graph() # To clear the defined variables and operations of the previous cell
# create the scalar variable
x_scalar = tf.get_variable('x_scalar', shape=[], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
# ____step 1:____ create the scalar summary
first_summary = tf.summary.scalar(name='My_first_scalar_summary', tensor=x_scalar)
init = tf.global_variables_initializer()
# launch the graph in a session
with tf.Session() as sess:
# ____step 2:____ creating the writer inside the session
writer = tf.summary.FileWriter('./graphs', sess.graph)
for step in range(100):
# loop over several initializations of the variable
sess.run(init)
# ____step 3:____ evaluate the scalar summary
summary = sess.run(first_summary)
# ____step 4:____ add the summary to the writer (i.e. to the event file)
writer.add_summary(summary, step)
print('Done with writing the scalar summary')Let's pull up our TensorBoard and check out the result.
As you see in the figure, the plot panel is shown with the name "My_first_scalar_summary", which we determined in our code. The x-axis and y-axis show the 100 steps and corresponding values (random values from a standard normal distribution) of the variable respectively.
This method plots the histogram of the values of a non-scalar tensor. This gives us a view of how does the histogram (and the distribution) of the tensor values change over time or iterations. In the case of neural networks, it's commonly used to monitor the changes of weights and biases distributions. It's very useful in detecting irregular behavior of the network parameters, such as when many of the weights shrink down or grow large.
Now let's go back to our previous example and add a histogram summary to it.
Continue the previous example by adding a matrix of size 30x40, whose entries come from a standard normal distribution. Initialize this matrix 100 times and plot the distribution of its entries over time, as follows:
import tensorflow as tf
tf.reset_default_graph() # To clear the defined variables and operations of the previous cell
# create the variables
x_scalar = tf.get_variable('x_scalar', shape=[], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
x_matrix = tf.get_variable('x_matrix', shape=[30, 40], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
# ____step 1:____ create the summaries
# A scalar summary for the scalar tensor
scalar_summary = tf.summary.scalar('My_scalar_summary', x_scalar)
# A histogram summary for the non-scalar (i.e. 2D or matrix) tensor
histogram_summary = tf.summary.histogram('My_histogram_summary', x_matrix)
init = tf.global_variables_initializer()
# launch the graph in a session
with tf.Session() as sess:
# ____step 2:____ creating the writer inside the session
writer = tf.summary.FileWriter('./graphs', sess.graph)
for step in range(100):
# loop over several initializations of the variable
sess.run(init)
# ____step 3:____ evaluate the merged summaries
summary1, summary2 = sess.run([scalar_summary, histogram_summary])
# s____step 4:____ add the summary to the writer (i.e. to the event file) to write on the disc
writer.add_summary(summary1, step)
# repeat steps 4 for the histogram summary
writer.add_summary(summary2, step)
print('Done writing the summaries')If you open the TensorBoard in your browser, you'll find two new tabs added to the top menu: "Distributions" and "Histograms". The results will be as follows:
As you see in the figure, the "Distributions" tab contains a plot that shows the distribution of the values of the tensor (y-axis) through steps (x-axis). You might ask, what are the light and dark colors?
The answer is that each line on the chart represents a percentile in the distribution over the data. For example, the bottom line (the very light one) shows how the minimum value has changed over time, and the line in the middle shows how the median has changed. Reading from top to bottom, the lines have the following meaning: [maximum, 93%, 84%, 69%, 50%, 31%, 16%, 7%, minimum]
These percentiles can also be viewed as standard deviation boundaries on a normal distribution: [maximum, μ+1.5σ, μ+σ, μ+0.5σ, μ, μ-0.5σ, μ-σ, μ-1.5σ, minimum] so that the colored regions, read from inside to outside, have widths [σ, 2σ, 3σ] respectively.
Similarly, in the histogram panel, each chart shows temporal "slices" of data, where each slice is a histogram of the tensor at a given step. It's organized with the oldest timestep in the back, and the most recent timestep in front.
You can easily see the values on the histograms at any step. Just move your cursor on the plot and see the x-y values on the histograms (Fig. 8 (a)). You can also change the Histogram Mode from "offset" to "overlay" (see Fig. 8 (b)) to see the histograms overlaid with one another.
As shown in the code, you need to run each summary (e.g. sess.run([scalar_summary, histogram_summary])) and then use your writer to write each of them to disk. In practice, you might use dozens or hundreds of such summaries to track different parameters in your model. This makes running and writing the summaries extremely inefficient. The way around it is to merge all summaries in your graph and run them at once inside your session. This can be done using the tf.summary.merge_all() method. If we use it for Example 3, the code changes as follows:
import tensorflow as tf
tf.reset_default_graph() # To clear the defined variables and operations of the previous cell
# create the variables
x_scalar = tf.get_variable('x_scalar', shape=[], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
x_matrix = tf.get_variable('x_matrix', shape=[30, 40], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
# ____step 1:____ create the summaries
# A scalar summary for the scalar tensor
scalar_summary = tf.summary.scalar('My_scalar_summary', x_scalar)
# A histogram summary for the non-scalar (i.e. 2D or matrix) tensor
histogram_summary = tf.summary.histogram('My_histogram_summary', x_matrix)
# ____step 2:____ merge all summaries
merged = tf.summary.merge_all()
init = tf.global_variables_initializer()
# launch the graph in a session
with tf.Session() as sess:
# ____step 3:____ creating the writer inside the session
writer = tf.summary.FileWriter('./graphs', sess.graph)
for step in range(100):
# loop over several initializations of the variable
sess.run(init)
# ____step 4:____ evaluate the merged summaries
summary = sess.run(merged)
# ____step 5:____ add summary to the writer (i.e. to the event file) to write on the disc
writer.add_summary(summary, step)
print('Done writing the summaries')Done writing the summariesAs the name says, this type of summary method writes and visualizes tensors as images. In the case of neural networks, this is usually used for tracking the images that are either fed to the network (say in each batch) or the images generated in the output (such as the reconstructed images in an autoencoder; or the fake images made by the generator model of a Generative Adversarial Network). However, in general, this can be used for plotting any tensor. For example, you can visualize a weight matrix of size 30x40 as an image of 30x40 pixels.
An image summary can be created like so:
tf.summary.image(name, tensor, max_outputs=3)where name is the name for the generated node (i.e. operation), tensor is the desired tensor to be written as an image summary (we will talk about its shape shortly), and max_outputs is the maximum number of elements from tensor to generate images for. But... what does it mean?! The answers likes in the shape of the tensor.
The tensor that you feed to tf.summary.image must be a 4-D tensor of shape [batch_size, height, width, channels] where batch_size is the number of images in the batch, height and width determine the size of the image and channel is: 1: for Grayscale images. 3: for RGB (i.e. color) images. 4: for RGBA images (where A stands for alpha; see RGBA).
Let's look at a very simple example to get the idea.
Let's define two variables:
Of size 30x10 as 3 grayscale images of size 10x10
Of size 50x30 as 5 color images of size 10x10
and plot them as images in your TensorBoard, as follows:
import tensorflow as tf
tf.reset_default_graph() # To clear the defined variables and operations of the previous cell
# create the variables
w_gs = tf.get_variable('W_Grayscale', shape=[30, 10], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
w_c = tf.get_variable('W_Color', shape=[50, 30], initializer=tf.truncated_normal_initializer(mean=0, stddev=1))
# ___step 0:___ reshape it to 4D-tensors
w_gs_reshaped = tf.reshape(w_gs, (3, 10, 10, 1))
w_c_reshaped = tf.reshape(w_c, (5, 10, 10, 3))
# ____step 1:____ create the summaries
gs_summary = tf.summary.image('Grayscale', w_gs_reshaped)
c_summary = tf.summary.image('Color', w_c_reshaped, max_outputs=5)
# ____step 2:____ merge all summaries
merged = tf.summary.merge_all()
# create the op for initializing all variables
init = tf.global_variables_initializer()
# launch the graph in a session
with tf.Session() as sess:
# ____step 3:____ creating the writer inside the session
writer = tf.summary.FileWriter('./graphs', sess.graph)
# initialize all variables
sess.run(init)
# ____step 4:____ evaluate the merged op to get the summaries
summary = sess.run(merged)
# ____step 5:____ add summary to the writer (i.e. to the event file) to write on the disc
writer.add_summary(summary)
print('Done writing the summaries')Done writing the summariesgradient tensorboards create --experiment <ID of the experiment>After a short while the instance should be up and running.
Now, if you open your TensorBoard like before and switch to the IMAGES tab, you'll see images that have been output, like these:
